Commander Online Help

Commander enables you to

• control your Alinco, Elecraft, FlexRadio, Icom, JST, Kachina, Kenwood, TenTec, or Yaesu radio from your PC

• direct a second Elecraft, FlexRadio, Icom, Kenwood, TenTec, or Yaesu radio to track your primary radio's frequency and mode

• direct your primary radio to follow another radio's frequency and mode, or follow another transceiver control application's frequency and mode

• see DX Spots plotted on a zoom-able bandspread display of your radio's currently-active band

• see frequency-dependent control settings for devices like tuners and amplifiers

• store and recall frequencies (and associated modes) from 100 memories organized into 10 banks

• manually or automatically switch between up to four connected radios

• control a microHam or OTRSP-compliant SO2R switching device

• monitor messages between your radio and your PC

• provide DXKeeper, PropView, SpotCollector, and WinWarbler with access to your radio's frequency and mode

   

  Prerequisites Downloading and Installation Quick Setup Configuration  Radio Model Primary CAT Serial Port Secondary CAT Serial Port SO2R Serial Port Parallel port S-Meter Display Transmission Meter Display Frequency-dependent devices Multiple radios Bandspread Transverters User-defined Controls Sub-band definition

  Changing frequency using the VFO panel via a wheeled mouse via keyboard action using the Bandspread Changing mode Changing receiver bandwidth Viewing and selecting DX spots Saving and restoring memories Controlling multiple radios Primary CAT Port Switching Secondary CAT Port User-defined Controls Command Sequences Command-generating Sliders Monitoring Messages