Commander: Supported Radios

CI-V Commander is designed to supported the following radios, but not all models have been tested. If you verify correct operation with a previously unverified model, or if you observe incorrect operation with any model, please notify AA6YQ via email.

Manufacturer Models # Verified? Notes
Alinco DX-77E yes
Alinco DX-77E yes
Apache Labs ANAN-200D yes set Commander's Model selector to SDR-3000
Elecraft K2 yes
Elecraft K3 yes
Elecraft KX3 yes
Elecraft K4 yes  
FlexRadio SDR-1000 yes
FlexRadio SDR-1500 yes
FlexRadio SDR-3000 yes
FlexRadio SDR-5000 yes
FlexRadio SDR-6300 yes
FlexRadio SDR-6400 yes
FlexRadio SDR-6500 yes
FlexRadio SDR-6600 yes
FlexRadio SDR-6700 yes
Hilberling PT8000
Icom IC-271    
Icom IC-275 yes  
Icom IC-375    
Icom IC-471    
Icom IC-475 yes  
Icom IC-575 yes  
Icom IC-705 yes see note #1 regarding filter setup below
Icom IC-706 yes  
Icom IC-706MKII yes  
Icom IC-706MKIIG yes  
Icom IC-707 yes  
Icom IC-718 yes
Icom IC-725 yes  
Icom IC-726    
Icom IC-728    
Icom IC-729    
Icom IC-731    
Icom IC-735 yes  
Icom IC-736 yes  
Icom IC-737 yes  
Icom IC-738    
Icom IC-746 yes
Icom IC-746PRO yes see note #1 regarding filter setup below
Icom IC-751    
Icom IC-756 yes  
Icom IC-756PRO yes see note #1 regarding filter setup below
Icom IC-756PRO II yes see note #1 regarding filter setup below
Icom IC-756PRO III yes see note #1 regarding filter setup below
Icom IC-761    
Icom IC-765 yes  
Icom IC-775 yes  
Icom IC-781 yes  
Icom IC-820 yes  
Icom IC-821 yes  
Icom IC-910 yes  
Icom IC-970    
Icom IC-1271    
Icom IC-1275    
Icom IC-7000 yes see note #1 regarding filter setup below
Icom IC-7100 yes see note #1 regarding filter setup below
Icom IC-7200 yes see note #1 regarding filter setup below
Icom IC-7300 yes see note #1 regarding filter setup below
Icom IC-7600 yes see note #1 regarding filter setup below
Icom IC-7610 yes see note #1 regarding filter setup below
Icom IC-7700 yes see note #1 regarding filter setup below
Icom IC-7800 yes see note #1 regarding filter setup below
Icom IC-7850 yes see note #1 regarding filter setup below
Icom IC-7851 yes see note #1 regarding filter setup below
Icom IC-7801 yes see note #1 regarding filter setup below
Icom IC-9100 yes see note #1 regarding filter setup below
Icom IC-9700 yes see note #1 regarding filter setup below
Icom R-10
Icom R-71
Icom R-72
Icom

R-75

Icom R-7000
Icom R-7100
Icom R-8500
Icom R-9000
Japan Radio Corp JRC-145 yes
Japan Radio Corp JRC-245 yes
Kachina 505 yes
Kenwood TS-50S yes
Kenwood TS-140S yes
Kenwood TS-440S yes
Kenwood TS-450S yes
Kenwood TS-480S yes
Kenwood TS-570D yes
Kenwood TS-570S yes
Kenwood TS-590S yes
Kenwood TS-590SG yes
Kenwood TS-680S yes
Kenwood TS-690S yes
Kenwood TS-711S yes
Kenwood TS-790S yes
Kenwood TS-811S yes
Kenwood TS-850S yes
Kenwood TS-870S yes
Kenwood TS-890S yes  
Kenwood TS-940S yes
Kenwood TS-950S yes
Kenwood TS-950SDX yes
Kenwood TS-990 yes
Kenwood TS-2000 yes
Kenwood R5000 yes
TenTec Argonaut yes
TenTec Argonaut II
TenTec Delta II yes
TenTec Eagle yes
TenTec Jupiter yes
TenTec Orion yes
TenTec Orion II yes
TenTec Omni V.9 yes  
TenTec Omni VI+  yes
TenTec Omni VII yes
TenTec Pegasus yes
Yaesu FT-100 yes
Yaesu FT-450 yes
Yaesu FT-747 yes
Yaesu FT-736R yes
Yaesu FT-757GX yes the FT-757GX does not provide CAT commands that enable Commander to track and report its frequency and mode; Commander can set  an FT-757GX transceiver's frequency and mode, enable split operation, and track its S-meter.
Yaesu FT-757GXII yes
Yaesu FT-767 yes
Yaesu FT-817 yes
Yaesu FT-840 yes
Yaesu FT-847 yes
Yaesu FT-857 yes
Yaesu FT-857D yes
Yaesu FT-890 yes
Yaesu FT-897 yes
Yaesu FT-900 yes
Yaesu FT-920 yes
Yaesu FT-950 yes
Yaesu FT-990 yes
Yaesu FT-990_12 yes
Yaesu FT-991 yes
Yaesu FT-1000MP yes
Yaesu FT-1000MP Mark V yes
Yaesu FT-2000 yes
Yaesu FTDX-10 yes  
Yaesu FTDX-101 yes  
Yaesu FTDX-1200 yes
Yaesu FTDX-3000 yes
Yaesu FTDX-5000 yes
Yaesu FTDX-9000 yes
Yaesu FTDX-9000P1 yes
  1. The transceivers "out-of-the box" filter setup is inconsistent with that of previous Icom transceivers. CI-V Commander assumes the following filter setup, which you can configure via the radio's menu system:
Filter# Setting
1 wide
2 narrow
3 normal

If you have questions or suggestions, please send them via email to AA6YQ.