This release - when directed by SpotCollector to activate a simplex RTTY spot database entry, ensures that split mode is disabled (tnx to Don AD0K) - provides Tune boxes in the CW and RTTY Transmit panels that are enabled if tuning is possible with your configuration; to tune, check the Tune box, and click the Start button; to stop tuning, click the Stop or Abort buttons (tnx to Juergen DL8LE and Joe W4TV) - when you double-click a "QSO Info" panel item caption, underlines that caption for one second and directs DXKeeper to filter the Log Page Display to contain only QSOs whose item contains the current value; for example, if the "QSO Info" panel's QTH textbox contains "Orlando", double-clicking the word QTH will direct DXKeeper to filter its Log Page Display to contain only QSOs whose QTH item contains "Orlando" (tnx to Bob W2SR) - provides the option to send CW via the transceiver control application via the "XCVR CTRL SW" option in the Keying panel on the Config window's CW tab; this option is only enabled if Commander's active transceiver can directly send CW, and requires Commander 6.4.0 or later (tnx to Andy K3UK, Don AD0K, and Joe W4TV) - provides and macro commands that direct Commander to place the transceiver in split or simplex operation, respectively (tnx to Henryk SP3E) - provides a macro command that if the transceiver is operating with split transmit and receive frequencies, sets the transceiver's transmit frequency to its receive frequency plus the offset in hertz (tnx to Henryk SP3E) - updates the CW.htm, CWSettings.htm, Logging.htm, Macros.htm, RTTYModemTransmission.htm, and SoundcardRTTYTransmission.htm online help files The new macro commands are aimed at enabling ops whose transceivers don't provide narrow filters when operating PSK or RTTY to use split frequency operation with the receiver in CW mode, exploiting its more narrow bandwidth. One would initiate this "style" of operation by executing a macro containing the commands Executing a macro containing the command would set the transceiver's transmit VFO, still in USB mode, to a frequency 700 hz above the frequency of its receive VFO to compensate for the transceiver's CW offset. Operation can be returned to "normal" by executing a macro containing the commands My attempt to have WinWarbler convey CW keying to a transceiver via a modem control signal on the serial port Commander uses for rig control proved insufficiently reliable in the V4 pileups; back to the drawing board... WinWarbler 4.9.9 is available via the DXLab Launcher or via http://www.dxlabsuite.com/download.htm 73, Dave, AA6YQ