This release - provides the option to direct SpotCollector (7.1.4 or later) to announce bands as their active DX stations are displayed in sequence - accepts a DDE command from another application that sets the QTH latitude and longitude and QTH location - updates the Configuration.htm and Operation.htm documentation files The new ann box in the "Scan DX Bands" panel on the Configuration window's "Plot Settings" tab will, if checked, cause DXView's "Scan DX" function to direct SpotCollector (7.1.4 or later) to announce each band as its active DX stations are displayed; with this option enabled and the dwell setting set to less than 3 seconds, a dwell time of 3 seconds will be used. DXView 4.0.9 is available via the DXLab Launcher or via 73, Dave, AA6YQ