Controlling an External Modem
WinWarbler can decode and generate CW, RTTY, and other digital modes via an External Modem connected to a serial port. WinWarbler interacts with a connected External Modem by sending it individual commands, e.g. Initialize or begin transmitting or switch to RTTY. The individual commands required for a particular model of External Modem are obtained from an External Modem Command File. WinWarbler includes External Modem Command Files for the KAM 98, MFJ 464, PK232, PK900, and PTC-IIe; you can create an External Modem Control File for other devices.
[:Multimode_Setup:Setting up CW, Phone, PSK, and RTTY Operation]
[:Operation:Getting Started with CW, Phone, PSK, and RTTY Operation]
[:GettingStarted:Getting Started with DXLab]