Controlling an External Modem

WinWarbler can decode and generate CW, RTTY, and other digital modes via an External Modem connected to a serial port. WinWarbler interacts with a connected External Modem by sending it individual commands, e.g. Initialize or begin transmitting or switch to RTTY. The individual commands required for a particular model of External Modem are obtained from an External Modem Command File. WinWarbler includes External Modem Command Files for the KAM 98, MFJ 464, PK232, PK900, and PTC-IIe; you can [ create an External Modem Control File] for other devices.

Required Connections

To control an External Modem, you will need

Each of the above connections should be described in detail in your External Modem's user guide.

Configuring WinWarbler

On the Configuration window's External Modem tab

[:Multimode_Setup:Setting up CW, Phone, PSK, and RTTY Operation]

[:Operation:Getting Started with CW, Phone, PSK, and RTTY Operation]

[:GettingStarted:Getting Started with DXLab]