Differences between revisions 1 and 4 (spanning 3 versions)
Revision 1 as of 2015-05-02 04:24:32
Size: 508
Editor: AA6YQ
Comment:
Revision 4 as of 2015-05-02 04:28:57
Size: 1000
Editor: AA6YQ
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
An Electcraft K3 or KX3 can be directed to transmit CW, report decoded CW, transmit RTTY, and report decoded RTTY via CAT commands. Doing so requires both !WinWarbler and Commander to be running.
Line 4: Line 5:
==== Additional Topics ==== === Transmitting and Receiving CW ===
Line 6: Line 7:
To configure @WinWarbler to transmit CW via CAT command, set the '''Keying''' panel on its Configuration window's '''CW''' Tab to {{{Xcvr Ctrl App}}}.



=== Additional Topics ===
 * [[K3PSKRTTY|Connecting and configuring the Elecraft K3 for PSK, RTTY, CW, and Phone operation]]

Configuring Command and WinWarbler for CW and RTTY Operation with an Elecraft K3 or KX3 using CAT Commands

An Electcraft K3 or KX3 can be directed to transmit CW, report decoded CW, transmit RTTY, and report decoded RTTY via CAT commands. Doing so requires both WinWarbler and Commander to be running.

Transmitting and Receiving CW

To configure @WinWarbler to transmit CW via CAT command, set the Keying panel on its Configuration window's CW Tab to Xcvr Ctrl App.

Additional Topics


Post a question or suggestion on the DXLab reflector

Getting Started with DXLab

K3CWRTTYXcv (last edited 2018-10-24 02:51:07 by AA6YQ)