This release - expands the maximum Main window width to make the right-hand panel borders visible - adds SteppIR to the Secondary CAT Port's protocol selector (tnx to Fred K3BHX) - adds CW Skimmer to the Secondary CAT Port's protocol selector - extends the Secondary CAT Port's emulation of an Elecraft K3 (tnx to Joe W4TV and Tom KQ5S) - when responding to an IF command from the Secondary CAT port when the Secondary CAT protocol selector is set to Kenwood, Elecraft, or Flexradio, includes VFO selection and the state of Split in the response - only sends the transceiver's IS poll responses to the Secondary CAT port if there's been an IS request received from the Secondary CAT port - responds to an IF command from the Secondary CAT port when the Secondary CAT protocol selector is set to FT-450, FT-950, FT-2000, FT-5000, or FT-9000 - provides an user-defined command to send commands to the SO2R port (tnx to Marek) - updates the CommandSequences.htm and Configuration.htm documentation files Note: the extension of the Secondary CAT Port's emulation of an Elecraft K3 was driven by support for the NaP3 and PowerSDR-IF panadators. The emulation is not complete, so some functions (e.g. NaP3's S-meter) remain unsupported. Commander 9.6.5 is available via the DXLab Launcher and via 73, Dave, AA6YQ