This release - handles Kenwood radio ID 008 as a TS-950,and Kenwoo radio ID ID006 as a TS-790 (tnx to Joe W4TV and Bernie W4BGH) - doesn't swap RX and TX frequencies sent to other applications when a Kenwood transceiver is directed to transmit by means other than a CAT command (tnx to Don AD0K) - suppresses the propagation of frequencies to other applications while processing a directive to place the transceiver in split mode at a specified frequency - supports CW-R and Dual Watch on an SDR-1000 (tnx to Rob AB7CF) - provides optional slider controls than can generate raw commands with scaled value substitution (tnx to many over the years) - uses undocumented commands to more rapidly set the VFO B frequency and mode for the Yaesu FT-1000MP Mark V, FT-1000MP, and FT-920 (tnx to Joe W4TV) - uses Elecraft K3 extended commands to set VFO B's mode to that of VFO A when setting VFO B's frequency (unverified) - adds the ExampleSliderSetup.htm online documentation file - updates the CommandSequences.htm and index.htm online documentation files Commander 7.0.2 is available via the DXLab Launcher and via http://www.dxlabsuite.com/download.htm . 73, Dave, AA6YQ