This release - ensures that frequency-dependent device readouts are updated on startup (tnx to Mike K9UW) - ensures that the Main window's Maximize button properly sets the right margin (tnx to John NA8M) - if interrogation was disabled in the previous operating session, no longer enables interrogation on startup for Icom transceivers whose S-meters are PC-accessible (tnx to Jamie W2QO) - ignores bogus characters appended to frequencies reported by an Orion (tnx to Mike K9UW and Chuck WS1L) - supports direct modification of the Secondary VFO frequency for most transceivers; modify the frequency, and strike the Enter key - for an Icom transceiver with interrogation disabled, ensures that Commander's Primary VFO displays the correct frequency after the Secondary VFO is set via the CI-V VFO exchange command (tnx to Jamie W2QO) - updates the ChangingFrequency.htm file Commander 5.7.6 is available via http://www.qsl.net/dxlab/download.htm or via this reflector's Files area. 73, Dave, AA6YQ