This release

- eliminates the errorlog.txt entry generated by BandSpreadPicture.MouseMove (tnx to Ben PG5S)

- corrects an accuracy problem with the 10 Hz frequency digit (tnx to Jamie W2QO and Mark NK2Y)

- eliminates the message "Failed to activate control VB. user.control" that appears on some PCs (tnx to Tom  KB2VNB)

- eliminate "BandSpreadForm.Form_Activate: Invalid procedure call or argument" Errorlog entry (tnx to Mark NK2Y)

- report command buffer overflows only if Log Debug Info is enabled

- corrects mode caption misalignment when transceiver starts up with focus in frequency display (tnx to Ben PG5S)

- correct rounding error in the 10 hz digit when accepting a split frequency via DDE (tnx to Jamie W2QO)

- don't attempt to auto-select a disabled transceiver (tnx to Joe W4TV)

- supports the Yaesu FT736R (tnx to Bob WA9NBU and Randy KA1LEX)

- warns the user if the digit group symbol and digit decimal symbol are identical, 

- provides a "Clear Memories" button (tnx to Bill W6WRT)

- adds bandspread suppport for 4m and 70cm

- adds automatic band selection support for 4m

- supports additive or subtractive  transverters on 6m, 4m, 2m, and 70cm (tnx to Joe W4TV)

- interprets CTRL-A in the VFO frequency display as "select all digits" (tnx to Angelo IT9FCP)

- permits the definition of up two 2 sub-bands per band, and highlight out-of-sub-band operation by displaying the VFO frequency in yellow

- updates the ChangingFrequency.htm, Configuration.htm, and index.htm online documentation files

Commander 5.3.7 is available via http://www.qsl.net/dxlab/download.htm or via this reflector's Files area.

    73,

        Dave, AA6YQ