This release - when controlling an FT-891 or FT-991, implements the AxB and XFC functions using the SV; command (tnx to John WA2FZW) - when changing the mode of a Yaesu FT-891 to RTTY, follows up with the appropriate EX command to correctly set the BFO (tnx to John WA2FZW) - correctly updates spots on Waterfall-Spectrum display (tnx to Björn SM7IUN) - promptly and fully displays frequency markers in the Waterfall-Spectrum display (tnx to Björn SM7IUN) - eliminates unnecessary Bandspread and Waterfall-Spectrum operations, and accelerates update of the Waterfall-Spectrum display (tnx to Björn SM7IUN) - when controlling an IC-7610, IC-7850, IC-7851, the Spectrum-Waterfall window always displays spectrum information for the Main VFO (tnx Art W2NRA and Björn SM7IUN) - properly updates an Icom Spectrum-Waterfall window's range when a command to change the range is present in the queue of commands to send to the radio (tnx to Björn SM7IUN) - prevents the "Switch to simplex on 1MHz QSY" option from disabling split when double-clicking a Spot Database Entry for a RTTY station that is operating split results in a band change (tnx to Björn SM7IUN) - when controlling an Icom radio that supports direct VFO read/write commands, accepts frequency reports generated by a QSY with the radio's "CI-V transceive" menu setting is enabled (tnx to Björn SM7IUN) - when controlling an Icom radio, doesn't issue a new command if the expected response from a previous command has not yet been received; this makes it possible to specify a smaller "Command Interval" on the Configuration window's General tab, and thereby obtain faster frequency tracking - when controlling a radio that uses Kenwood-style CAT commands, ignores truncated IF command responses (tnx to Larry W8LIG) - supports the Yaesu FT-818 - when controlling a Flex Signature radio running SmartSDR version 2.3.4 or later, provides the option of displaying active DX callsigns on the SmartSDR panadaptor (Tnx to Eric KE5DTO and Steve N5AC) *** Commander can only control the font color to reflect "need"; participation in eQSL AG and LoTW is included in the popup explanation that appears when you let the mouse cursor hover over a callsign for a few seconds *** SmartSDR 2.3.4 is currently in alpha test *** when controlling a Flex Signature radio, Commander displays the SmartSDR version in the Radio panel on the Configuration window's General tab *** screenshot: *** additional information: "Displaying Active Callsigns on SmartSDR's Panadaptor" in - references "Getting Started with DXLab" via HTTPS - updates the ChangingFrequency.htm, Changing Mode.htm, CommandSequences.htm, Configuration.htm, ControllingMultipleRadios.htm, index.htm, and Prerequesites.htm documentation files (conversion from HTTP to HTTPS) Notes: 1. The option to display callsigns on a Flex Signature radio's panadaptor is only provided if you are running SmartSDR version 2.3.4 or later; at present, this version is only available to SmartSDR alpha testers. 2. Update your firewall and anti-malware applications to consider this new version of Commander to be "safe" 3. If this upgrade doesn't work correctly, see the "After an Upgrade" section of 4. After upgrading, to revert to the previous version of Commander, see Commander 13.6.5 is available via the DXLab Launcher and via 73, Dave, AA6YQ