This release

- corrects errors in the control codes sent when controlling the Width slider for an FT-891 or FT-991 (tnx to Jerry AF6MW)

- when controlling an FT-891, uses the ST CAT command to enable/disable split (tnx to John WA2FZW)

- when controlling an FT-891, correctly decodes the IS and SH CAT commands (tnx to Jerry AF6MW)

- when controlling an FT-891, correctly issues the IS and SH CAT commands (tnx to Jerry AF6MW)

- ignores spectrum frequencies above 2.1 GHz (tnx to Ghassan OD5YA)

- in the Bandspread window, prevents large vertical distances between a callsign and its frequency (tnx to Don WB6BEE)

- in the Bandspread window, ensures that callsigns are displayed at the correct X coordinate 

- prevents an errorlog.txt file entry generated by BandSpreadForm.HandleSpot state 61 (tnx to Björn SM7IUN)

- enables CW Skimmer connected to the Secondary CAT Port to track the primary transceiver's VFO selection and Split (tnx to Björn SM7IUN)

- ensures that Spectrum-Waterfall window frequency ticks are only 1 pixel wide (tnx to Björn SM7IUN)

- eliminates unnecessary repainting of the Spectrum-Waterfall window's Callsign section (tnx to Björn SM7IUN)

- updates the Spectrum-Waterfall window's display of active callsigns when under heavy flow of new active DX stations (tnx to Björn SM7IUN)

- when controlling an Icom radio that provides CI-V commands to directly access VFOs, uses those commands to access the current VFO and periodically issues "opcode 3" frequency requests for devices that monitor their response (tnx to Björn SM7IUN)

- with multiple primary transceivers having spectrum-waterfall capability, retains separate Band, CW, Data, and Phone reference level settings for each transceiver whose enable box is checked on the Configuration window's MultiRadio tab (tnx to Björn SM7IUN)

- improves the smoothness of frequency tracking of Icom transceivers (tnx to Björn SM7IUN)

- when in fixed Spectrum mode, updates the Spectrum Waterfall window's RX and TX frequency markers without redrawing the frequency axis or callsigns (tnx to Björn SM7IUN)

- executes  <SPECTRUMMODE M>, <SPECTRUMFIXEDRANGE L,U> and <SPECTRUMREFLEVEL R> commands in command sequences  (tnx to Björn SM7IUN)

- executes <Dual On> and <Dual Off> commands in command sequences (tnx to Björn SM7IUN)

- updates the CommandSequences.htm, and Configuration.htm, documentation files


Notes:

1. Update your firewall and anti-malware applications to consider this new version of Commander to be "safe" 

2. If this upgrade doesn't work correctly, see the "After an Upgrade" section of <http://www.dxlabsuite.com/dxlabwiki/ApplicationStoppedWorking>

3. After upgrading, to revert to the previous version of Commander, see <http://www.dxlabsuite.com/dxlabwiki/RevertApplicationVersion>


Commander 13.3.6 is available via the DXLab Launcher and via 

<http://www.dxlabsuite.com/download.htm>

     73,

          Dave, AA6YQ


     73,

          Dave, AA6YQ