This release - when controlling a Flex-6000, *** doesn't create Slice B when "Dual Receive" is being disabled *** correctly sets VFO B's mode when Split is set by another application (tnx to Bob, N7ZO) *** and directed to set split, creates the required slice if it's not present (tnx to Bob, N7ZO) *** doesn't create a slice if creation of that slice has already been requested but not acknowledged (tnx to Bob, N7ZO) *** doesn't set the other VFO's transmit flag when a VFO is reported to no longer be present (tnx to Roger W9YU) *** supports the new RTTY mode provided by SmartSDR 1.5 (tnx to Bob K5KDN and Bob N7ZO) *** and directed by another application to change the transceiver's mode to CW-R, changes the transceiver's mode to CW (tnx to John K1ESE) *** and directed by another application to change the transceiver's mode to RTTY-R, changes the transceiver's mode to RTTY *** provides a new "Full width RX Filters" option that when enabled supports the maximum 12 KHz RX filter bandwidth in CW, LSB, USB, DIGL, DIGU, and RTTY modes - improves frequency tracking for Yaesu FTDX-9000, FTDX-5000, FTDX-3000, FT-2000, FTDX-1200, FT-991, FT-950, and FT-450 radios (tnx to Dan KC2STA) - provides TX meter display for Yaesu FTDX-9000, FTDX-5000, FTDX-3000, FT-2000, FTDX-1200, FT-991, and FT-950 radios (tnx to Dan KC2STA and Art W2NRA) - provides an RF TX meter display for Kenwood TS-590S and TS-590SG radios (tnx to Andy K3YWC) - includes S-meter and TX-meter files for the Kenwood TS-590S (tnx to Andy K3YWC) - accepts an "xcvrfiltergroup" directive, allowing other applications to select a Filter Group (tnx to Joe W4TV) - updates the Configuration.htm, and TXMeter.htm documentation files Notes: 1. Instructions for using Commander and WinWarbler with a Flex 6300, 6500, or 6700 is available via 2. special thanks to Bob N7ZO who patiently provided errorlog.txt fikes so I could correct defects in Flex 6000 support while travelling sans radio Commander 11.9.3 is available via the DXLab Launcher and via 73, Dave, AA6YQ