This release - reports decoded CW from a K3 or KX3 when in CW-R mode as well as when in CW mode (tnx to Chris NJ5N) - while processing a "CmdQSXSplit" TCP directive, suspends the processing of DDE and TCP directives until the "Set TX frequency" TCP directive has completely executed (tnx to Bill G4WJS) - when controlling an Icom transceiver and selecting the Main/A VFO when the Sub/B VFO is currently selected, correctly updates the Main/A frequency made available to other applications (tnx to Bill G4WJS) - when the primary transceiver's split is enabled and the "Follow Alternate VFO when Split" option is enabled, updates the Secondary transceiver's frequency when the primary transceiver's alternate VFO frequency changes - when directed by another application to set the transceiver's split frequency, doesn't round that frequency to the nearest 10 Hz (tnx to Bill G4WJS) - supports the IC-7851 - tracks the Sub VFO frequency for IC-7600, IC-7800, IC-7850, and IC-7851 (tnx to Tim NZ8J, Larry K8UT, and Jim K7EG) - tracks the VFO B frequency for IC-7100 and IC-7700 (tnx to Steve VK3MEG) - tracks changes in DualWatch for the IC-7600, IC-7800, IC-7850, and IC-7851 (tnx to Larry K8UT) Notes: 1. updated firmware is required for the for the IC-7100, IC-7600, IC-7700 , and IC-7800 2. while Commander can now track the Sub VFO in the C-7600, IC-7800, IC-7850, and IC-7851, VFO B in the IC-7100 and IC-7700, and DualWatch status in the IC-7600, IC-7800, IC-7850, and IC-7851, it still can't determine which VFO is currently selected. Thus you should continue to use the A/B or Main/Sub buttons on Commander's Main window when switching VFOs -- not the radio's A/B or Main/Sub buttons. Commander 11.4.8 is available via the DXLab Launcher and via 73, Dave, AA6YQ