This release - doesn't send an MD1X; command to FTDX-3000 when enabling split (tnx to Tim NZ8J) - when controlling an FTDX-3000, uses the AB; command to set VFO B's mode when setting VFO B's frequency, and to implement A=B (tnx to Tim NZ8J and Lou N2TU) - accepts commands via TCP/IP that set the frequency and mode, report the frequency, and report the mode (tnx to Joe K1JT and Cliff K3LL) - accepts commands via TCP/IP that set the rx frequency, set the tx frequency, set the mode, set/clear split, switch to transmit, switch to receive, and report the tx frequency (tnx to Joe K1JT and Cliff K3LL) - only updates the Main window's PTT panel when an Elecraft, FlexRadio, Kenwood (except TS-990), or Yaesu FT1000MP or Mark V switches between RX and TX if the "No interrogation while transmitting" option is disabled (tnx to Art K6XT) - provides a "set Xcvr split" option in the "DX Spots" panel on the Configuration window's Bandspread tab that determines whether or not clicking a bandspread spot of a station operating split places the transceiver in split mode at the specified QSX frequency (tnx to Mark K7MTR) - updates the ChangingFrequency.htm, Configuration.htm, and MonitoringMessages.htm documentation files Commander 10.3.9 is available via the DXLab Launcher and via 73, Dave, AA6YQ