This release 

- does not disable the Enable boxes on the Configuration window's "Multi Radio" tab when those boxes are checked (tnx to Bill AB4BJ)

- informs external applications when a Yaesu FT1000MP or Mark V switches between RX and TX

- updates the Main window's PTT panel when an Elecraft, FlexRadio, Kenwood (except TS-990), or Yaesu  FT1000MP or Mark V switches between RX and TX

- sets the Primary VFO frequency to the radio's current frequency when the Esc key is struck with the mouse cursor in Commander's Primary VFO (tnx to Iain N6ML)

- enables a Yaesu FT-817, FT-857, FT-857D, or FT-897 transceiver to be connected to the Secondary CAT port in follow-only mode

- updates the ChangingFrequency.htm documentation file

Commander 10.3.5 is available via the DXLab Launcher and via 

<http://www.dxlabsuite.com/download.htm>

     73,

          Dave, AA6YQ