This release - properly plots information on Google Earth when operating from a non-English locale (tnx to Salvatore I4FYV) - corrects a regression in support for N1MM Rotor V12.11 (tnx to Rich W3ZJ) - indicates when information displayed in the Main window was obtained from the IOTA database - maintains and displays locations to degree-minutes-seconds accuracy (tnx to Gary AB9M and Joe W4TV) - enables the specification of a station callsign, and uses the specified QTH latitude and longitude as the location of this station callsign (thanks to Stefano IZ3XNJ) - updates the Configuration and Operation.htm documentation files Notes: 1. the new "Station Callsign" box in the QTH panel on the Configuration window's General tab lets you specify your Station Callsign. DXView will use latitude and longitude specified in the QTH panel as the location of the specified Station Callsign. 1. the new "Station Callsign" box in the QTH panel on the Configuration window's General tab lets you specify your Station Callsign. DXView will use latitude and longitude specified in the QTH panel as the location of the specified Station Callsign. The Station Callsign will be initialized with the Default Station Callsign specified in DXKeeper, if DXKeeper is installed. 2. DXView's QRZ lookup function, which uses "QRZ.com via Pathfinder", has been upgraded to report locations in degree-minutes-seconds where so specified. DXView 3.7.8 is available via the DXLab Launcher or via 73, Dave, AA6YQ