DXLab DXCC Database 2.3.4 Change Notes

 

If you've just installed DXView and haven't yet run DXKeeper, SpotCollector, or WinWarbler, then no further action is required.

If you've been running any of DXView, DXKeeper, SpotCollector, or WinWarbler and just upgraded to DXCC Database 2.3.4,

Prefix DXCC Entity Action

PJ9

Bonaire, Curacao (deleted)

"Entity Prefix" changed from PJ2 to PJ9

PJ8

Sint Maarten, Saba, St Eustatius

"Entity Prefix" changed from PJ5 to PJ8

PJ2

Curacao

Country Code changed from 901 to 517

"Entity Prefix" changed from 0A1 to PJ2

IOTA tag changed from SA-006 to SA-099

PJ4

Bonaire

Country Code changed from 902 to 520

"Entity Prefix" changed from 0A2 to PJ4

PJ5

St Eustatius

Country Code changed from 903 to 519

"Entity Prefix" changed from 0A3 to PJ5

Country Name changed from "St Eustatius" to "St Eustatius and Saba"

PJ6

Saba

Country Code changed from 904 to 519

"Entity Prefix" changed from 0A4 to PJ5

Country Name changed from "St Eustatius" to "St Eustatius and Saba"

PJ7

St Maarten

Country Code changed from 905 to 518

"Entity Prefix" changed from 0A5 to PJ7

 

  1. If you're not running DXKeeper 8.9.9 or later, direct the DXLab Launcher to upgrade DXKeeper

  2. Start DXKeeper

  3. On the Configuration window's Log tab, click the Backup folder panel's Backup button and create a log backup

  4. On the Main window's Log QSOs tab, click the Filter panels' X button

  5. On the Main window's Log QSOs tab, click the Adv button to open the Advanced Sorts, Filters, and Modifiers window; in this window,

    • click the Scripts panel's Run button (in the window's lower-right corner)

    • in the Run Script window, navigate to DXKeeper's Scripts folder, and click the FIX_PJ.txt entry

    • click the Open button

  6. On the Main window's Check Progress tab, click the Recompute button along the bottom; DXKeeper will display a report showing all changes made to your log, which includes changing the "Entity Prefix" of all QSOs with the now-deleted entities of "Bonaire, Curacao" and "Sint Maarten, Saba, St Eustatius"

  7. if you have more than one log file, apply steps 3-6 to each

  1. if you're not running SpotCollector 5.4.0 or later, direct the DXLab Launcher to upgrade SpotCollector

  2. on the Config window's Spot Database tab, click the Recomputation panel's Recomp button