Viewing the Spot Database Display from Another Computer, Tablet, or SmartPhone

SpotCollector's built-in Web Server enables you to view entries in the Spot Database Display using a web browser running on a computer, tablet, or smartphone connected to the PC on which SpotCollector is running - either wirelessly, or via a local area network (LAN).

To enable SpotCollector's Web Server, do the following in the Web Server panel on the Configuration window's Spot Database tab:

  1. set the Port to 80

  2. set the Spots per page to 30 (you can increase or decrease this later)

  3. set the Refresh interval (minutes) to 5 (you can decrease this later, but not to less than 0.5)

  4. check the Enable box

To view the Spot Database Display from a web browser running on another device, you must first determine the network name of the PC on which SpotCollector is running:

If the network name of the PC running SpotCollector is Fido, then type the URL http://fido/spots into the web browser on your network-connected device; the web browser will display entries from the Spot Database Display, updated at the interval specified in the Web Server panel on the Configuration window's Spot Database Display tab. The green panel below the Spot Database Entries enables you to remotely

If the device from which you are remotely viewing the Spot Database Display is a SmartPhone or small tablet, direct its web browser to a URL like URL http://fido/smallspots for a view with fewer columns.

You can extend remote access beyond the bounds of your local area network


[http://groups.yahoo.com/group/dxlab/post Post a question or suggestion on the DXLab reflector]

[:CollectingSpots:Getting Started with Spot Collection]

[:GettingStarted:Getting Started with DXLab]