Configuring and Using DXKeeper with eQSL.cc
Data can be uploaded from DXKeeper to eQSL.cc in three different wauys:
- Automatically upload QSO data to eQSL.cc in real time when you log QSO's via the Capture window.
IIf you have more than a couple hundered QSO's to upload to eQSL.cc, method 1 will be the fastest even though it requires a little more manual work on your part. Method 2 is easier to use than method one and should work well for relatively small uploads (say less than 300 QSO's). If you have an always on Internet connection such as Cable, DSL, Satellite or WISP you will probably find method 3 very convenient for keeping your eQSL Oubox up to date automatically as you log QSO's via the Capture window.
The sections below describe in detail how to configure and use DXKeeper to perform each of these operations.
(Under construction, coming soon)
[http://groups.yahoo.com/group/dxlab/post Post a question or suggestion on the DXLab reflector]
[:QSLingeQSL:QSLing with eQSL]
[:GettingStarted:Getting Started with DXLab]