Differences between revisions 22 and 23
Revision 22 as of 2006-07-15 14:26:19
Size: 1274
Editor: AC5-Webproxy31
Revision 23 as of 2006-07-15 14:28:55
Size: 1276
Editor: AC5-Webproxy31
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= Uploading QSOs to eQSL = == Uploading QSOs to eQSL ==

Uploading QSOs to eQSL

Data can be uploaded from DXKeeper to eQSL.cc in three different ways:

  1. [:ExporteQSLADIF:Export an ADIF file for eQSL] (Amateur Data Interchange Format) from DXKeeper and [:ManuallyUploadToEQSL:manually upload it to eQSL.cc] NOTE: If you have more than a couple hundred QSO's to upload to eQSL.cc, this will be the fastest method even though it requires more manual work on your part.

  2. [:UploadeQSLMarked:Upload all QSO's whose eQSL.cc sent field is marked with an "R"] (Request). NOTE: This is easier to use than Exporting an ADIF file and should work well for relatively small uploads (say less than 300 QSO's depending on the speed of your Internet connection).

  3. [:AutomaticeQSLUpload:Automatically upload] QSO data to eQSL.cc in real time when you log QSO's via the Capture window. If you have an always on Internet connection such as Cable, DSL, Satellite or WISP you will probably find this method very convenient for keeping your eQSL Outbox up to date automatically as you log QSO's via the Capture window.

[http://groups.yahoo.com/group/dxlab/post Post a question or suggestion on the DXLab reflector]

[:QSLingeQSL:QSLing with eQSL]



[:GettingStarted:Getting Started with DXLab]

UploadeQSL (last edited 2018-07-04 04:48:36 by AA6YQ)