Differences between revisions 3 and 4
Revision 3 as of 2015-05-12 01:14:51
Size: 1404
Editor: AA6YQ
Comment:
Revision 4 as of 2015-05-12 01:15:47
Size: 1291
Editor: AA6YQ
Comment:
Deletions are marked like this. Additions are marked like this.
Line 5: Line 5:
An Elecraft K3 or KX3 can be directed to transmit CW, report decoded CW, transmit RTTY, and report decoded RTTY via CAT commands, eliminating the need for any external interface. Doing so requires both !WinWarbler and Commander to be running, with Commander [[TranceiverControlElecraft|configured to control an Elecraft K3 or KX3]]. However, a connected P3 configured to display decoded CW or RTTY interferes with the K3's ability to report decoded CW or RTTY to Commander, and thus [must be disabled: An Elecraft K3 or KX3 [[K3CWRTTYXcv|can be directed to transmit CW, report decoded CW, transmit RTTY, and report decoded RTTY via CAT commands]], eliminating the need for any external interface. Doing so requires both !WinWarbler and Commander to be running, with Commander [[TranceiverControlElecraft|configured to control an Elecraft K3 or KX3]]. However, a connected P3 configured to display decoded CW or RTTY interferes with the K3's ability to report decoded CW or RTTY to Commander, and thus [must be disabled:
Line 14: Line 14:
 * [[K3CWRTTYXcv|Configuring Commander and WinWarbler for CW and RTTY Operation with an Elecraft K3 or KX3 using CAT Commands]]

Disabling an Elecraft P3's Display of Decoded CW and RTTY

de Ron W3ZV

An Elecraft K3 or KX3 can be directed to transmit CW, report decoded CW, transmit RTTY, and report decoded RTTY via CAT commands, eliminating the need for any external interface. Doing so requires both WinWarbler and Commander to be running, with Commander configured to control an Elecraft K3 or KX3. However, a connected P3 configured to display decoded CW or RTTY interferes with the K3's ability to report decoded CW or RTTY to Commander, and thus [must be disabled:

  1. Tap the Menu button
  2. Rotate the Select knob to SVGA Menu
  3. Tap the Select knob
  4. Rotate the Select knob to SVGA Data
  5. Tap the Select knob to toggle Data Display on or off

Additional Topics


Post a question or suggestion on the DXLab reflector

Getting Started with DXLab

DisableElecraftP3DecodedTextDisplay (last edited 2018-07-12 16:40:58 by AA6YQ)