Size: 2613
Comment:
|
Size: 2614
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 42: | Line 42: |
* set the '''LSB Xcvr Mode'' selector to ''RTTY'' | * set the '''LSB Xcvr Mode''' selector to ''RTTY'' |
Line 45: | Line 45: |
* set the '''FSK Control''' as required by the [:FSKConnection]FSK connection] | * set the '''FSK Control''' as required by the [:FSKConnection:FSK connection] |
Configuring WinWarbler for RTTY Operation
on the Main window,
set the Operating Mode panel to RTTY
on the Configuration window's RTTY tab
check the enabled box
set the Speed to 45.45
set the Shift to 170
set the Default TxPwer to the RF power output (in watts) that you'll be using
check the unshift on space box
uncheck the Reverse panel's transmit and receive boxes
set the Keyboard mode to word
in the Tuning display panel,
select
set the waterfall display to mono
in the XY display panel,
check the
uncheck the reverse rotation box
set the frequency trace width to 1
set the gain to 2
in the Modulation and transceiver mode panel
if transmitting via [:AFSKFSK:AFSK], then in the
select
set the Xcvr Mode selector to LSB
set the Mark Offset to 0
set the Optimal Offset to 2210
if transmitting via [:AFSKFSK:FSK], then in the FSK sub-panel
select LSB
set the LSB Xcvr Mode selector to RTTY
set the LSB Mark Offset to -2125
set the Optimal Offset to 2210
set the FSK Control as required by the [:FSKConnection:FSK connection]
in the MMTTY Engine window panel, uncheck the enabled box
on the Configuration window's Display tab. click the Set Default Colors button
on the Main window,
in the Receive panel,
check the AFC box
uncheck the BPF box
uncheck the Reverse box
set the Squelch Threshold to ~25 by clicking in the Signal Quality display to position the Squelch Bar:
in the Transmit panel,
check the net box
uncheck the reverse box
in the Tuning Display panel,
set the Vert height to 1.0
set the Horiz zoom to 1
[:Multimode_Setup:Setting up CW, Phone, PSK, and RTTY Operation]
[:Operation:Getting Started with CW, Phone, PSK, and RTTY Operation]
[:GettingStarted:Getting Started with DXLab]