Differences between revisions 3 and 13 (spanning 10 versions)
Revision 3 as of 2009-06-21 23:32:43
Size: 1919
Editor: AA6YQ
Comment:
Revision 13 as of 2009-06-22 15:47:19
Size: 2940
Editor: AA6YQ
Comment:
Deletions are marked like this. Additions are marked like this.
Line 15: Line 15:
   a. set the '''Default TxPwer''' to the RF power output (in watts) that you'll be using    a. set the '''Default !TxPwer''' to the RF power output (in watts) that you'll be using
Line 19: Line 19:
   a. uncheck the '''Reverse''' panel's '''transmit''' and '''receive'' boxes    a. uncheck the '''Reverse''' panel's '''transmit''' and '''receive''' boxes
Line 21: Line 21:
   a. set the '''Keyboard mode''' to '''word'''    a. set the '''Keyboard mode''' to ''word''
Line 31: Line 31:
     
   a. in the '''Modulation and transceiver mode''' panel

     i. if transmitting via [:AFSKFSK:AFSK], then in the '''AFSK''' sub-panel
       * select ''LSB''
       * set the '''Xcvr Mode''' selector to ''LSB''
       * set the '''Mark Offset''' to ''0''
       * set the '''Optimal Offset''' to ''2210''

     i. if transmitting via [:AFSKFSK:FSK], then in the '''FSK''' sub-panel
       * select ''LSB''
       * set the '''LSB Xcvr Mode''' selector to ''RTTY''
       * set the '''LSB Mark Offset''' to ''-2125''
       * set the '''Optimal Offset''' to ''2210''
       * set the '''FSK Control''' as required by the [:FSKConnection:FSK connection]
    
Line 33: Line 48:

   [http://www.dxlabsuite.com/Wiki/Graphics/WinWarbler/ConfigRTTY.jpg]
Line 41: Line 58:
     * uncheck the '''Reverse''' box
Line 47: Line 65:
     * uncheck the '''split''' and '''tune''' boxes      * uncheck the '''reverse''' box
Line 52: Line 70:

==== Other RTTY options ====

 * Decoding and generating CW, RTTY, and other digital modes by a [:ExternalModemControl:controlling an external Modem] connected to a serial port; supported modems include the KAM 98, MFJ 464, PK232, PK900, and PTC-IIe

Configuring WinWarbler for RTTY Operation

  1. on the Main window,

    1. set the Operating Mode panel to RTTY

  2. on the Configuration window's RTTY tab

    1. check the enabled box

    2. set the Speed to 45.45

    3. set the Shift to 170

    4. set the Default TxPwer to the RF power output (in watts) that you'll be using

    5. check the unshift on space box

    6. uncheck the Reverse panel's transmit and receive boxes

    7. set the Keyboard mode to word

    8. in the Tuning display panel,

      • select waterfall

      • set the waterfall display to mono

      • in the XY display panel,

        • check the enabled box

        • uncheck the reverse rotation box

      • set the frequency trace width to 1

      • set the gain to 2

    9. in the Modulation and transceiver mode panel

      1. if transmitting via [:AFSKFSK:AFSK], then in the AFSK sub-panel

        • select LSB

        • set the Xcvr Mode selector to LSB

        • set the Mark Offset to 0

        • set the Optimal Offset to 2210

      2. if transmitting via [:AFSKFSK:FSK], then in the FSK sub-panel

        • select LSB

        • set the LSB Xcvr Mode selector to RTTY

        • set the LSB Mark Offset to -2125

        • set the Optimal Offset to 2210

        • set the FSK Control as required by the [:FSKConnection:FSK connection]

    10. in the MMTTY Engine window panel, uncheck the enabled box

      [http://www.dxlabsuite.com/Wiki/Graphics/WinWarbler/ConfigRTTY.jpg]

  3. on the Configuration window's Display tab. click the Set Default Colors button

  4. on the Main window,

    1. in the Receive panel,

    2. in the Transmit panel,

      • check the net box

      • uncheck the reverse box

    3. in the Tuning Display panel,

      • set the Vert height to 1.0

      • set the Horiz zoom to 1

Other RTTY options

  • Decoding and generating CW, RTTY, and other digital modes by a [:ExternalModemControl:controlling an external Modem] connected to a serial port; supported modems include the KAM 98, MFJ 464, PK232, PK900, and PTC-IIe


[:Multimode_Setup:Setting up CW, Phone, PSK, and RTTY Operation]

[:Operation:Getting Started with CW, Phone, PSK, and RTTY Operation]

[:GettingStarted:Getting Started with DXLab]

ConfigureRTTY (last edited 2020-01-26 07:37:43 by AA6YQ)