Differences between revisions 2 and 3
Revision 2 as of 2009-06-16 13:26:18
Size: 300
Editor: AA6YQ
Comment:
Revision 3 as of 2009-06-21 23:32:43
Size: 1919
Editor: AA6YQ
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
 * [:SoundcardConfiguration:Configuring Soundcards]  1. on the '''Main''' window,

   a. set the '''Operating Mode''' panel to ''RTTY''

 1. on the '''Configuration''' window's '''RTTY''' tab

   a. check the '''enabled''' box

   a. set the '''Speed''' to ''45.45''

   a. set the '''Shift''' to ''170''

   a. set the '''Default TxPwer''' to the RF power output (in watts) that you'll be using

   a. check the '''unshift on space''' box

   a. uncheck the '''Reverse''' panel's '''transmit''' and '''receive'' boxes

   a. set the '''Keyboard mode''' to '''word'''

   a. in the '''Tuning display''' panel,
     * select '''waterfall'''
     * set the '''waterfall display''' to ''mono''
     * in the '''XY display''' panel,
        * check the '''enabled''' box
        * uncheck the '''reverse rotation''' box
     * set the '''frequency trace width''' to ''1''
     * set the '''gain''' to ''2''
     
   a. in the '''MMTTY Engine window''' panel, uncheck the '''enabled''' box

 1. on the '''Configuration''' window's '''Display''' tab. click the '''Set Default Colors''' button

 1. on the '''Main''' window,

   a. in the '''Receive''' panel,
     * check the '''AFC''' box
     * uncheck the '''BPF''' box
     * set the '''Squelch Threshold''' to ~25 by clicking in the '''Signal Quality''' display to position the '''Squelch Bar''':

      [http://www.dxlabsuite.com/Wiki/Graphics/WinWarbler/RTTYSignalQuality.jpg]

   a. in the '''Transmit''' panel,
     * check the '''net''' box
     * uncheck the '''split''' and '''tune''' boxes

   a. in the '''Tuning Display''' panel,
     * set the '''Vert height''' to ''1.0''
     * set the '''Horiz zoom''' to ''1''

Configuring WinWarbler for RTTY Operation

  1. on the Main window,

    1. set the Operating Mode panel to RTTY

  2. on the Configuration window's RTTY tab

    1. check the enabled box

    2. set the Speed to 45.45

    3. set the Shift to 170

    4. set the Default TxPwer to the RF power output (in watts) that you'll be using

    5. check the unshift on space box

    6. uncheck the Reverse panel's transmit and receive boxes

    7. set the Keyboard mode to word

    8. in the Tuning display panel,

      • select waterfall

      • set the waterfall display to mono

      • in the XY display panel,

        • check the enabled box

        • uncheck the reverse rotation box

      • set the frequency trace width to 1

      • set the gain to 2

    9. in the MMTTY Engine window panel, uncheck the enabled box

  3. on the Configuration window's Display tab. click the Set Default Colors button

  4. on the Main window,

    1. in the Receive panel,

    2. in the Transmit panel,

      • check the net box

      • uncheck the split and tune boxes

    3. in the Tuning Display panel,

      • set the Vert height to 1.0

      • set the Horiz zoom to 1


[:Multimode_Setup:Setting up CW, Phone, PSK, and RTTY Operation]

[:Operation:Getting Started with CW, Phone, PSK, and RTTY Operation]

[:GettingStarted:Getting Started with DXLab]

ConfigureRTTY (last edited 2019-01-17 21:32:16 by AA6YQ)