Differences between revisions 14 and 15
Revision 14 as of 2012-05-21 21:17:49
Size: 2471
Editor: AA6YQ
Comment:
Revision 15 as of 2013-03-28 15:10:21
Size: 2498
Editor: localhost
Comment: converted to 1.6 markup
Deletions are marked like this. Additions are marked like this.
Line 5: Line 5:
 1. Setup the [:PTTMechanism: Transceiver-to-PC PTT (reception-transmission switching) connection]  1. Setup the [[PTTMechanism| Transceiver-to-PC PTT (reception-transmission switching) connection]]
Line 7: Line 7:
 1. Setup the [:CWConnection:CW Keying connection]  1. Setup the [[CWConnection|CW Keying connection]]
Line 9: Line 9:
 1. [:ConfigureCW: Configure WinWarbler for CW Operation]  1. [[ConfigureCW| Configure WinWarbler for CW Operation]]
Line 15: Line 15:
    a. if [:TransceiverControl: Commander] isn't running, set your transceiver's mode to ''CW''     a. if [[TransceiverControl| Commander]] isn't running, set your transceiver's mode to ''CW''
Line 17: Line 17:
Note: to display decoded CW, !WinWarbler requires either an [:ExternalModemControl:external HF modem] (e.g. KAM 98, MFJ 464, PK232, PK900, and PTC-IIe) or the applications [http://www.dxsoft.com/en/products/cwget CWGet] and [http://home.roadrunner.com/~w3oa/CWGetToWinwarbler CWGet to WinWarbler]. Note: to display decoded CW, !WinWarbler requires either an [[ExternalModemControl|external HF modem]] (e.g. KAM 98, MFJ 464, PK232, PK900, and PTC-IIe) or the applications [[http://www.dxsoft.com/en/products/cwget|CWGet]] and [[http://home.roadrunner.com/~w3oa/CWGetToWinwarbler|CWGet to WinWarbler]].
Line 21: Line 21:
    [http://www.dxlabsuite.com/Wiki/Graphics/WinWarbler/CWMain.jpg]     {{http://www.dxlabsuite.com/Wiki/Graphics/WinWarbler/CWMain.jpg}}
Line 35: Line 35:
Your transceiver should switch from reception to transmission, transmitted characters should appear in the '''Main''' window's '''Receive pane''', and your transceiver should switch from transmission to reception after all characters have been sent. You can also transmit by [:Macros:constructing and invoking macros]. Your transceiver should switch from reception to transmission, transmitted characters should appear in the '''Main''' window's '''Receive pane''', and your transceiver should switch from transmission to reception after all characters have been sent. You can also transmit by [[Macros|constructing and invoking macros]].
Line 37: Line 37:
Decoding and display of received CW is only available via the [http://www.dxlabsuite.com/winwarbler/Help/CW.htm#Additional%20CW%20options use of an external modem], or via [http://home.roadrunner.com/~w3oa/CWGetToWinwarbler/CWGetToWinWarbler.zip interoperation with CWGet]. Decoding and display of received CW is only available via the [[http://www.dxlabsuite.com/winwarbler/Help/CW.htm#Additional%20CW%20options|use of an external modem]], or via [[http://home.roadrunner.com/~w3oa/CWGetToWinwarbler/CWGetToWinWarbler.zip|interoperation with CWGet]].
Line 41: Line 41:
  * Decoding CW with [http://www.dxsoft.com/en/products/cwget CwGet]   * Decoding CW with [[http://www.dxsoft.com/en/products/cwget|CwGet]]
Line 43: Line 43:
    * [http://home.roadrunner.com/~w3oa/CWGetToWinwarbler/ displaying CW characters decoded by CwGet in WinWarbler's CW Receive Pane]     * [[http://home.roadrunner.com/~w3oa/CWGetToWinwarbler/|displaying CW characters decoded by CwGet in WinWarbler's CW Receive Pane]]
Line 45: Line 45:
    * [:CWGetCommander: Enabling CwGet to track and set your transceiver's frequency]     * [[CWGetCommander| Enabling CwGet to track and set your transceiver's frequency]]
Line 47: Line 47:
  * [http://www.dxlabsuite.com/winwarbler/Help/Logging.htm Logging QSOs]   * [[http://www.dxlabsuite.com/winwarbler/Help/Logging.htm|Logging QSOs]]
Line 49: Line 49:
  * [http://www.dxlabsuite.com/winwarbler/Help/Macros.htm Defining and using macros]   * [[http://www.dxlabsuite.com/winwarbler/Help/Macros.htm|Defining and using macros]]
Line 53: Line 53:
[:Operation:Operating in CW, Phone, PSK, and RTTY] [[Operation|Operating in CW, Phone, PSK, and RTTY]]
Line 55: Line 55:
[:GettingStarted:Getting Started with DXLab] [[GettingStarted|Getting Started with DXLab]]

Operating in CW

Setting up for CW Transmission

  1. Setup the Transceiver-to-PC PTT (reception-transmission switching) connection

  2. Setup the CW Keying connection

  3. Configure WinWarbler for CW Operation

  4. Configure your transceiver
    1. set your transceiver frequency to an open CW band
    2. if Commander isn't running, set your transceiver's mode to CW

Note: to display decoded CW, WinWarbler requires either an external HF modem (e.g. KAM 98, MFJ 464, PK232, PK900, and PTC-IIe) or the applications CWGet and CWGet to WinWarbler.

Main window in CW Mode

  • http://www.dxlabsuite.com/Wiki/Graphics/WinWarbler/CWMain.jpg

Operating CW

To transmit CW, on WinWarbler's Main window

  • set the WPM box to the desired speed in words per minute

  • click the Start button in the CW transmit panel

  • type the characters to be sent in the Main windows Transmit pane

  • click the Stop button in the CW transmit panel

Your transceiver should switch from reception to transmission, transmitted characters should appear in the Main window's Receive pane, and your transceiver should switch from transmission to reception after all characters have been sent. You can also transmit by constructing and invoking macros.

Decoding and display of received CW is only available via the use of an external modem, or via interoperation with CWGet.

Additional Information


Operating in CW, Phone, PSK, and RTTY

Getting Started with DXLab

CW_Operation (last edited 2019-06-12 15:48:28 by AA6YQ)