Differences between revisions 2 and 4 (spanning 2 versions)
Revision 2 as of 2010-10-06 04:27:56
Size: 1414
Editor: AA6YQ
Comment:
Revision 4 as of 2010-10-06 04:34:04
Size: 1577
Editor: AA6YQ
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
[http://www.dxatlas.com/CwSkimmer CW Skimmer] [http://www.dxatlas.com/CwSkimmer CW Skimmer] interoperation
Line 3: Line 3:
 * to track and set your transceiver's frequency from CW Skimmer  * track and set your transceiver's frequency from CW Skimmer
Line 10: Line 10:
 * [http://home.roadrunner.com/~w3oa/SkimmerToDXKeepe to click on a callsign in CW Skimmer and have that callsign conveyed to DXKeeper, DXView, PropView, Pathfinder, and WinWarbler]  * [http://home.roadrunner.com/~w3oa/SkimmerToDXKeeper click on a callsign in CW Skimmer and have that callsign conveyed to DXKeeper, DXView, PropView, Pathfinder, and WinWarbler]
Line 12: Line 12:
 * to have callsigns decoded by CW Skimmer added to SpotCollector's Spot Database  * have callsigns decoded by CW Skimmer added to SpotCollector's Spot Database
Line 14: Line 14:
   1. open the '''Settings''' item in CW Skimmer's '''View''' menu    * Configure CW Skimmer
Line 16: Line 16:
   1. select the '''Settings''' window's '''Telnet''' tab    1. open the '''Settings''' item in CW Skimmer's '''View''' menu
Line 18: Line 18:
   1. set the '''Port''' to ''7301''    1. select the '''Settings''' window's '''Telnet''' tab
Line 20: Line 20:
   1. check the '''Enable Telnet Server''' box    1. set the '''Port''' to ''7301''
Line 22: Line 22:
   1. click the '''OK''' button    1. check the '''Enable Telnet Server''' box
Line 24: Line 24:
 * configure SpotCollector to use CW Skimmer as a spot source      1. click the '''OK''' button
Line 26: Line 26:
   * configure !SpotCollector: on the '''Configuration''' window's '''Spot Sources''' tab, choose an available "row" in the '''Telnet DXClusters''' panel
Line 27: Line 28:
     1. set the '''Host address''' to ''127.0.0.1''
Line 28: Line 30:
Now go to SpotCollector>Config>Spot Sources
in one of the blank Telnet DXClusters positions
check Enable, Auto, Hide
in Host Address enter 127.0.0.1 local ypoxkjlg
in Port enter 7301 (the same as you entered in CWS)
in Caption inter CWS
In Username enter your call
in CMD enter C (C as in connect)
     1. set the '''Port''' to ''7301''
Line 37: Line 32:
     1. set the '''Caption''' to ''CW Skimmer''
Line 38: Line 34:
     1. set the '''Username''' to your callsign

     1. clear the '''Password'''

     1. set the '''Cmd''' to ''C''

     1. check the '''Enable''', '''Auto''', and '''Hide''' boxes

[http://www.dxatlas.com/CwSkimmer CW Skimmer] interoperation

  • track and set your transceiver's frequency from CW Skimmer
  • [http://home.roadrunner.com/~w3oa/SkimmerToDXKeeper click on a callsign in CW Skimmer and have that callsign conveyed to DXKeeper, DXView, PropView, Pathfinder, and WinWarbler]

  • have callsigns decoded by CW Skimmer added to SpotCollector's Spot Database

    • Configure CW Skimmer
      1. open the Settings item in CW Skimmer's View menu

      2. select the Settings window's Telnet tab

      3. set the Port to 7301

      4. check the Enable Telnet Server box

      5. click the OK button

    • configure SpotCollector: on the Configuration window's Spot Sources tab, choose an available "row" in the Telnet DXClusters panel

      1. set the Host address to 127.0.0.1

      2. set the Port to 7301

      3. set the Caption to CW Skimmer

      4. set the Username to your callsign

      5. clear the Password

      6. set the Cmd to C

      7. check the Enable, Auto, and Hide boxes


[http://groups.yahoo.com/group/dxlab/post Post a question or suggestion on the DXLab reflector]

[:GettingStarted:Getting Started with DXLab]

["Interoperation"]

CWSkimmer (last edited 2018-07-12 17:04:54 by AA6YQ)