Differences between revisions 1 and 30 (spanning 29 versions)
Revision 1 as of 2006-07-03 02:18:50
Size: 1903
Editor: AA6YQ
Comment:
Revision 30 as of 2018-07-12 16:59:05
Size: 2243
Editor: AA6YQ
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
=== Adding a New DXCC Entity === == Adding a New DXCC Entity ==
Line 3: Line 3:
Example using Montenegro, whose country code is 514 but whose DXCC prefix has not yet been chosen: Example using Swain's island, whose country code is 515 but whose DXCC prefix has not yet been chosen:
Line 5: Line 5:
1. terminate SpotCollector and DXKeeper either is running  1. terminate !SpotCollector and DXKeeper if either is running
Line 7: Line 7:
2. type YU6DZ in the DXView's Main window's Search panel, and then strike the Enter key  1. type KH8SI in the DXView's Main window's Search panel, and then strike the Enter key
Line 9: Line 9:
3. click the Main window's DXCC button (bottom-middle); the "DXVIew DXCC Database" window will appear, with the "Serbia & Montenegro" with Location "Montenegro" displayed. In this window  1. click the Main window's DXCC button (bottom-middle); the "DXView DXCC Database" window will appear, with the "American Samoa" with Location "Swain's Island" displayed. In this window
Line 11: Line 11:
a.  change the Entity Name to Montenegro   a. change the Entity Name to Swain's Island
Line 13: Line 13:
b.  change the Country Code to 514   a. change the Country Code to 515
Line 15: Line 15:
c.  change the Entity Prefix to Z4 (this is a guess; you'll have to change this and modify your logged QSOs later if the ITU makes a different choice)   a. change the Entity Prefix to KH8S (this is a guess; you'll have to change this and modify your logged QSOs later if the ITU makes a different choice)
Line 17: Line 17:
d. in the Database Version panel, check the "Flag new as modified" box   a. set the Start Date to 2006-07-22
Line 19: Line 19:
e. click the Save button   a. in the Database Version panel, check the "Flag new as modified" box
Line 21: Line 21:
f. click the reTable button (this takes a few minutes)   a. click the Save button
Line 23: Line 23:
4. close the DXView DXCC Database window   a. click the reTable button (this takes a few minutes)
Line 25: Line 25:
5. in DXView's Main window, type YU6AO in the Search panel and strike the Enter key; DXView should display the Entity as Montenegro  1. close the DXView DXCC Database window
Line 27: Line 27:
6. Start DXKeeper  1. in DXView's Main window, type KH8SI in the Search panel and strike the Enter key; DXView should display the Entity as Swain's Island
Line 29: Line 29:
a. select the Main window's Awards tab, and click the Recompute button; this will rebuild the DXCC progress table in the currently open Log to include an entry for Montenegro.  1. Start DXKeeper
Line 31: Line 31:
b. modify any QSOs with Montenegro stations to have a DXCC entity of Montenegro (use the Entity selector in the Aux panel on the Main window's Log QSOs tab)   a. select the Main window's '''Check Progress''' tab, and click the '''Recompute''' button; this will rebuild the DXCC progress table in the currently open Log to include an entry for Swain's Island
Line 33: Line 33:
You'll need to repeat steps 6a and 6b for each of your active logs (if you have more than one).   a. modify any valid QSOs with Swain's Island stations to have a DXCC entity of Swain's Island (use the Entity selector in the Aux panel on the Main window's Log QSOs tab)
Line 35: Line 35:
With the DXCC database updated, SpotCollector will now properly flag Montenegro spots as needed. Without a Z4.wav file, however, Joe DX's announcement will lack an entity name; you can record your own temporary Z4.wav file if you like, and place it in SpotCollector's Sounds folder.   a. repeat steps 6a and 6b for each of your active logs (if you have more than one).
Line 37: Line 37:
7. Start !SpotCollector

  a. on the Configuration window's '''Spot Database''' tab, click the '''Recomputation''' panel's '''Recomp''' button

  a. With the DXCC database updated, !SpotCollector will now properly flag Swain's Island spots as needed. Without a KH8S.wav file, however, Joe DX's announcement will lack an entity name; you can record your own temporary KH8S.wav file if you like, and place it in !SpotCollector's {{{Sounds}}} folder.
Line 40: Line 45:
[:TransceiverControl:Transceiver Control] [[DXLabDiscussionGroup|Post a question or suggestion on the DXLab Discussion Group]]
Line 42: Line 47:
[:GettingStarted:Getting Started with DXLab] [[DxInfo|DX Information]]

[[
GettingStarted|Getting Started with DXLab]]

Adding a New DXCC Entity

Example using Swain's island, whose country code is 515 but whose DXCC prefix has not yet been chosen:

  1. terminate SpotCollector and DXKeeper if either is running

  2. type KH8SI in the DXView's Main window's Search panel, and then strike the Enter key
  3. click the Main window's DXCC button (bottom-middle); the "DXView DXCC Database" window will appear, with the "American Samoa" with Location "Swain's Island" displayed. In this window
    1. change the Entity Name to Swain's Island
    2. change the Country Code to 515
    3. change the Entity Prefix to KH8S (this is a guess; you'll have to change this and modify your logged QSOs later if the ITU makes a different choice)
    4. set the Start Date to 2006-07-22
    5. in the Database Version panel, check the "Flag new as modified" box
    6. click the Save button
    7. click the reTable button (this takes a few minutes)
  4. close the DXView DXCC Database window
  5. in DXView's Main window, type KH8SI in the Search panel and strike the Enter key; DXView should display the Entity as Swain's Island
  6. Start DXKeeper
    1. select the Main window's Check Progress tab, and click the Recompute button; this will rebuild the DXCC progress table in the currently open Log to include an entry for Swain's Island

    2. modify any valid QSOs with Swain's Island stations to have a DXCC entity of Swain's Island (use the Entity selector in the Aux panel on the Main window's Log QSOs tab)
    3. repeat steps 6a and 6b for each of your active logs (if you have more than one).

7. Start SpotCollector

  1. on the Configuration window's Spot Database tab, click the Recomputation panel's Recomp button

  2. With the DXCC database updated, SpotCollector will now properly flag Swain's Island spots as needed. Without a KH8S.wav file, however, Joe DX's announcement will lack an entity name; you can record your own temporary KH8S.wav file if you like, and place it in SpotCollector's Sounds folder.


Post a question or suggestion on the DXLab Discussion Group

DX Information

Getting Started with DXLab

AddNewEntity (last edited 2018-07-12 16:59:05 by AA6YQ)