Differences between revisions 9 and 12 (spanning 3 versions)
Revision 9 as of 2011-01-24 20:27:50
Size: 2386
Editor: AA6YQ
Comment:
Revision 12 as of 2012-01-14 07:25:43
Size: 2477
Editor: AA6YQ
Comment:
Deletions are marked like this. Additions are marked like this.
Line 47: Line 47:
[:RTTY_Operation: RTTY Operation]

[:Operation:Operating in CW, Phone, PSK, and RTTY]

Obtaining the AA6YQ-FIR-512 Profile

The AA6YQ-FIR-512 [http://www.dxlabsuite.com/winwarbler/Help/SoundcardRTTYSettings.htm#MMTTY%20Engine%20Configuration Profile] is optimized for weak signal decoding through the use of sharp filters. Sharp filters require more computation than broader filters, so expect an increased CPU load when using this profile.

If you are using WinWarbler and wish to gain access to this Profile, replace the USERPARA.INI file in your WinWarbler folder with the USERPARA.INI file in WinWarbler's Profiles folder, and then restart WinWarbler.

If you are using MMTTY standalone, or with another application that uses MMTTY as its RTTY engine, you can download a USERPARA.INI file that defines the following eight profiles:

  • Standard RTTY
  • Fluttered Signals
  • Flutter Signals (FIR)
  • 23 Hz RTTY (MMTTY)
  • Multi-path
  • hyper sensitive
  • EU1SA
  • AA6YQ-FIR-512

To obtain and use this file,

  1. terminate MMTTY
  2. in the folder that contains your MMTTY.EXE file, rename the existing USERPARA.INI file to USERPARA_ORIG.INI
  3. download [http://www.dxlabsuite.com/winwarbler/USERPARA.INI] and save it into the folder that contains your MMTTY.EXE file

  4. start MMTTY, open the Profile menu, and verify that the eight profiles listed above are available; then choose the one you wish to use.

Reverting to your Original USERPARA.INI file

If desired, you can revert to your original USERPARA.INI file by doing the following in the folder that contains your MMTTY.EXE file

  1. terminate MMTTY
  2. delete USERPARA.INI
  3. rename USERPARA_ORIG.INI to USERPARA.INI
  4. start MMTTY

Inserting the AA6YQ-FIR-512 Profile into an existing USERPARA.INI file

To insert the AA6YQ-FIR-512 Profile into your existing USERPARA.INI file, you can download its settings via [http://www.dxlabsuite.com/winwarbler/AA6YQ-FIR-512.txt] and use a text editor like Notepad to insert it into the USERPARA.INI file in the same folder that your MMTTY.EXE file lives. Standalone MMTTY is limited to 8 profiles, so you may have to remove a profile from your USERPARA.INI to make room for this one; if you have a profile named AA6YQ in your USERPARA.INI file, simply replace it with the AA6YQ-FIR-512 profile. Then restart MMTTY.


[:RTTY_Operation: RTTY Operation]

[:Operation:Operating in CW, Phone, PSK, and RTTY]

[:GettingStarted:Getting Started with DXLab]

AA6YQ-FIR-512 (last edited 2013-03-28 15:10:20 by localhost)