== Interoperating with Software-defined Radios, Consoles, and Panadaptors ==

Commander's Secondary CAT Port makes it possible for SDR-based consoles and panadaptors like [[http://www.woodboxradio.com/freeware.html|BobCAT]], [[http://www.hdsdr.de/|HDSDR]], [[http://www.telepostinc.com/NaP3.html|NaP3]], [[http://www.flexradio.com/amateur-products/flex-series/powersdr/|PowerSDR]], [[http://www.sdr-radio.com/|SDR-Radio]], or [[http://www.moetronix.com/spectravue.htm|SpectraVue]] to both track and control your Primary transceiver's frequency:

{{http://www.dxlabsuite.com/Wiki/Graphics/Commander/sdr3.jpg}}


 * [[WaterfallBandmap|Interoperating with the Waterfall Bandmap]]
 * [[SDRInteroperation|Interoperating with a Software-defined Radio Console using Connected Virtual Serial Ports]]
 * [[SDRInteroperationmicroham|Interoperating with a Software-defined Radio Console using a microHAM interface with CAT control]]
 * [[SpectraVueConfiguration|Configuring the SpectraVue SDR Console with an SDR-IQ or SDR-14]]
 * [[HDSDRCWSkimmerConfiguration|Configuring HDSDR and CW Skimmer with a Transceiver and SDR Hardware]]
 * [[SDRConsoleCWSkimmerConfiguration|Configuring SDR Console and CW Skimmer with a Transceiver and SDR Hardware]]
 * [[IC7610HDSDRCWSkimmerConfiguration|Configuring DXLab and the Icom 7610 for simultaneous independent VFO operations with HDSDR and CW Skimmer]]
 * [[BobCATConfiguration|Configuring the BobCAT SDR Console for use with a Perseus]]
 * [[ConnectedVirtualSerialPortPairs|Connected Virtual Serial Port Pairs]]


----
[[DXLabDiscussionGroup|Post a question or suggestion on the DXLab Discussion Group]]

[[TransceiverControl|Transceiver Control]]

[[Interoperation|Interoperation with Other Amateur Radio Applications]]

[[GettingStarted|Getting Started with DXLab]]