== Plotting Logged QSOs, Active DX stations, and Spotting Stations on on the DX Atlas World Map ==

If you have [[http://www.dxatlas.com|DX Atlas]] installed, you can configure DXView to display information on the DX Atlas World Map by clicking the '''Enable''' button in the '''DX Atlas''' panel in the bottom-left corner of the '''World Map''' tab of DXView's '''Configuration''' window. At the top of the DX Atlas window, you can select a '''Rectangular''', '''Azimuthal''', or '''Globe''' projection.

=== Plotting Logged QSOs ===

To plot Logged QSOs in DXKeeper's '''Log Page Display''' on the DX Atlas World Map

 1. [[QSOFiltering| Filter]] DXKeeper's '''Log Page Display''' to contain the QSOs to be plotted; to plot all QSOs in your log, click the '''Filter''' panel's '''X''' button at the bottom of the '''Log QSOs''' tab of DXKeeper's '''Main''' window.

 1. just above the '''Log Page Display''' on the '''Log QSOs''' tab of DXKeeper's '''Main''' window, click the '''Plot''' button

 1. On the '''Plot Settings''' tab of DXView's '''Configuration''' window, the '''Selection''' panel will have changed from '''Spots''' to '''Log'''; check or uncheck the '''Unworked''', '''Unconfirmed''', '''Confirmed''', and '''Verified''' boxes in this Panel to filter the plotted QSOs as desired.

QSOs in the DXKeeper's '''Log Page Display''' will be plotted as red dots on the DX Atlas World Map. Placing the mouse cursor on plotted red dot for a second or two will produce a small popup window describing the logged QSO's callsign, DXCC entity, band, mode, and grid square.

==== Rectangular projection ====

{{https://www.dxlabsuite.com/dxview/PlottedQSOsDXAtlas.jpg}}

=== Plotting Active DX stations and Spotting Stations ===

To plot Active DX stations and Spotting Stations,

 1. On the '''Plot Settings''' tab of DXView's Configuration window, click the '''Selection''' panel's '''Spots''' button. 

 1. To plot spotting stations and the short path between spotting stations and DX stations, 

    a. on the '''Plot Settings''' tab of DXView's Configuration window, check the '''Selection''' panel's '''QSOs''' button. 

    a. on the General tab of !SpotCollector's Configuration window, check the '''General''' panel's '''Lookup missing location info''' box

==== Rectangular projection ====

{{https://www.dxlabsuite.com/dxview/DX%20Atlas.jpg}}

==== Azimuthal projection ====

{{https://www.dxlabsuite.com/Wiki/Graphics/ActiveStationsDXAtlasAzimuthal.jpg}}

==== Globe projection ====

{{https://www.dxlabsuite.com/Wiki/Graphics/ActiveStationsDXAtlasGlobal.jpg}}

=== Antenna Rotation ===

If you depress the '''Ctrl''' key while clicking a plotted DX Station on the DX Atlas World Map, DXView will [[RotatorControl|rotate your antenna]] to the short path heading; if you depress the '''Alt''' key, DXView will [[RotatorControl|rotate your antenna]] to the long path heading. 

These actions require the DX Atlas '''Panning Mode''' to be disabled; otherwise, clicking on the DX Atlas World Map will move the map.

=== Google Earth ===

If '''Google Earth''' is [[GoogleEarthPlotting|installed and enabled]], QSOs plotted on the DX Atlas World Map will also be plotted on '''Google Earth'''.

=== Additional Topics ===

[[DXAtlasWindows7|Using DX Atlas with DXView on Vista, Windows 7, Windows 8, Windows 10, or Windows 11]]

----
[[DXLabDiscussionGroup|Post a question or suggestion on the DXLab Discussion Group]]

[[GridPlottingDXAtlas|Plotting Worked and Confirmed Grid Squares on the DX Atlas World Map]]

[[QSODisplay|Displaying QSOs]]

[[Logging]]

[[DxInfo| DX Information and Mapping]]

[[GettingStarted|Getting Started with DXLab]]