This release - if split or dual-watch are not enabled in the active radio's entry in the radio.txt file, never sendS the radio split or dual-watch commands, respectively - doesn't provide a CW-R mode selection button for the Icom 706MKIIG (tnx to Earl KD5XB) - properly maps mode-specific filter codes for the Icom 706MKIIG (tnx to Earl KD5XB) - works around the FT0; toggle defect in the Yaesu FTDX-9000 (tnx to Lou N2TU) - adds a polling interval delay after sending a set frequency or set mode command to a Yaesu FTDX-9000 (tnx to Lou N2TU) - adds a polling interval delay after sending any command to a Yaesu FTDX-9000 while responding to a "set frequency" or "set split frequency" DDE operation (tnx to Lou N2TU) Commander 6.3.7 is available via the DXLab Launcher and via http://www.dxlabsuite.com/download.htm . 73, Dave, AA6YQ