This release - makes the Bandspread window's frequency labels clickable (tnx to Igor UA6LJB) - in DDE and TCP/IP mode change commands, accepts DIGL and DIGU as synonyms for RTTY and RTTY-R respectively (tnx to Bill G4WJS) - when controlling a Flex 6000 series radio, *** ensures that the Main window's Mode panel displays the DIGU selector (tnx to JIM NM1W) *** accepts DATA-L and PKT as synonyms for RTTY, and accepts DATA-U and PKT-R as synonyms for RTTY-R *** directs WinWarbler version 8.1.5 or later to make DIGL and DIGU available as transceiver modes - replaces the "automatically set RTS to 'On' when controlling Kenwood models or Yaesu models FT-9000, FT-5000, FT-3000, FT-2000, FT-1200, FT-950, or FT-450" enhancement included in Commander 11.2.0 with a mechanism that informs the user if one of these radios is being controlled, "Continuous interrogation" is enabled, the primary CAT port RTS selector is not set to "On", and the radio is not responding (tnx to Bill G4WJS) - updates the CommandSequences.htm and Configuration.htm documentation files Commander 11.2.3 is available via the DXLab Launcher and via 73, Dave, AA6YQ