This release 

- correctly conveys "Icom Sync" status to other applications (tnx to Joe K6ATZ)

- if MultiRadio operation is enabled, provides other applications with an indication of which transceiver is enabled at startup

- allows the "Filter Group Data File" pathname to be cleared (tnx to Chuck WS1L)

- makes the Main window's Config button visible when the window's width is at its minimum (tnx to Joe W4TV)

- when controlling a Flex 6300, 6500, or 6700, provides DIGL and DIGU mode selection rather than RTTY and RTTY-R

- eliminates the need to strike F10 and SHIFT-F10 twice when invoking a user-defined command sequence

- sets the Primary Port RTS to "On" for Kenwood radios and Yaesu radios that employ the Kenwood protocol (tnx to Joe W4TV)

- sets Secondary Port RTS to "On" for Kenwood radios and Yaesu radios that employ the Kenwood protocol (tnx to Joe W4TV)


Commander 11.2.0 is available via the DXLab Launcher and via 

<http://www.dxlabsuite.com/download.htm>

     73,

          Dave, AA6YQ