This release 

- when selecting a simplex memory while controlling an Icom transceiver, selects the transceiver's Main VFO (VFO A) before setting it to the frequency stored in that memory (tnx to Jim KK1W)

- changes the upper 10m frequency in DefaultBandSegments.txt from 29.900 to 29.700 (tnx to Ken K4XL)

- provides the ability to control a Yaesu FT-1000D's CW filter bandwidth (tnx to Don VA7ZT)

- provides additional commands for use in user-defined sequences (tnx to Mark W2OR)

... <QSY +f> - add f KHz to the primary transceiver frequency

... <QSY -f> - subtract f KHz to the primary transceiver frequency 

... <QSY f> - QSY the primary transceiver to f KHz

... <Mode m> - set the transceiver mode to AM, CW, CW-R, DATA-L, DATA-U, FM, LSB, PKT, PKT-R, RTTY, RTTY-R, USB, or WBFM

... <Split on> - enable split

... <Split off> - disable split

- updates the CommandSequences.htm documentation file


Note that the new commands available for use in user-defined sequences are transceiver independent, meaning that they will work with any transceiver make and model. They are of course limited by the transceiver's capabilities: <MODE RTTY> won't be effective if the current transceiver does not provide a RTTY mode.


Commander 10.1.0 is available via the DXLab Launcher and via 

<http://www.dxlabsuite.com/download.htm>

     73,

          Dave, AA6YQ